May 28 2013
Representatives of German and Italian Standardization Bodies and experts of German and Italian industry have agreed to make a common proposal to CENELEC, European Committee for Electrotechnical Standardization, to enhance the existing standard on charging plugs for the electric vehicle charging infrastructure.
The agreement is an important step towards achieving the single e-mobility charging infrastructure as required by the European Commission. The compromise foresees using the Type 2 socket outlet with an optional shutter for the electric vehicle charging infrastructure. The option of using a shutter takes into account specific concerns inItalyand some other countries, and the special market requirements there. Nevertheless, vehicle users will be glad to hear that compatibility with the Type 2 socket outlet that does not have this shutter, as used in the majority of European countries, is ensured. The solution provides a good basis for the European automobile industry and is another example of how standards can be successful deregulation tools.
Over recent months Italian and German experts from standardization and industry have been working intensively to harmonize requirements for the different types of charging plug and charging modes according to the standards EN 62196-2:2012 and EN 61851-1. Important points of discussion were the mechanical shutter used in some countries (includingItaly) in combination with the socket outlet for charging, and the specific requirements regarding the charging infrastructure for lightweight vehicles. For charging these lightweight vehicles, which include scooters – very popular inItaly- and three- or four-wheeled vehicles, it was also agreed to propose that the Type 3a socket outlet may be used either with or without a shutter.
The European Standards EN 62196-1:2012 and EN 62196-2:2012 published last year by the European Committee for Electrotechnical Standardization (CENELEC) already describe plugs, socket-outlets, vehicle connectors and vehicle inlets for electric vehicles, but do not go so far as to lay down a single standardized charging solution for the whole of Europe.
Other European countries which are currently accustomed to employing a shutter have the option of using the new solution to comply with the Commission's demand that there should be a single Europe-wide charging infrastructure on the basis of the Type 2 plug.
The German-Italian proposal, which has already been communicated to the relevant Technical Committee at European level, CENELEC/TC23BX and will be communicated to CENELEC/TC69X, and is due to be implemented soon, paves the way towards establishing a common solution for all CEN/CENELEC countries. In Germany, the work of the expert group and other activities are managed and coordinated by Working Group 4 "Standardization and Certification" of the National Platform for Electromobility, working closely with DIN, the German Institute for Standardization and the technical committees of the DKE (German Commission for Electrical, Electronic and Information Technologies of DIN and VDE). On behalf ofItaly, the work was carried out by CEI, the Italian Electrotechnical Committee.
The Type 2 plug was introduced into the international standardization process as early as 2009. It supports both single- and three-phase charging and enables far greater powered charging and shorter charging times than the couplers used inJapanand theUnited States, which only support single-phase charging. The availability of a single safe and efficient charging infrastructure enabling electric cars to be charged whatever their make and no matter where they are located is vital for the breakthrough of electromobility inEuropeand the world in general.
Media Contact DIN: Peter C. Anthony, Tel. 030 2601-1113, [email protected]
Media Contact DKE: Melanie Unseld, Phone: +49-69-6308 461, e-mail: [email protected]