Nov 26 2009
CI Solar Supplies provides a range of wind powered pumping systems manufactured by Airlift Technologies. The Airlift water pumping windmills are used for pond filling and pond aeration. The windmill pumps are constructed using no plunger type assemblies or leathers. The Airlift water pumping windmills can be located in a place where maximum wind blows.
Airlift 1 H.O. Water Pumping Windmill
The Airlift 1 H.O. water pumping windmill’s blades are made of 6061 T-6 tempered aluminum. To begin its operation, this water pumping windmill requires a wind speed of 5 to 8mph. This wind powered pumping system incorporates steel turn out assembly, which is weather resistance, auto furling mechanism, 5052 aluminum tail vane, aluminum cover and an internal compression spring. There is a single or twin cylinder compressor made of industrial cast iron. The single cylinder compressor has a capacity of 1.6cu.ft. of air volume per minute. The twin cylinder compressor has a capacity of 5cu.ft. of air volume per minute.
The Airlift 1 H.O. water pumping windmill is equipped with an air injection pump, which has a length of 4ft. Its maximum water lifting capacity is 315ft. The blade span diameter of this pumping system is 9ft. The main frame of Airlift 1 H.O. windmill is made of cast stainless steel. This water pumping windmill is equipped with a twin cylinder industrial compressor, which is able to provide 10 gallons of water per minute. Its gross weight is 275lbs and net weight is 225lbs.