Mar 6 2010
Integrated Solar manufactures Coppersun solar hot water collectors that incorporate a patented roof integrated design. This design suits roof surfaces, making the collector look like a skylight. The CS-330B Coppersun solar collector from the company has a capacity of 30 gallons.
CS-330B Coppersun Solar Collector
The CS-330B Coppersun solar collector is installed in bottom connection method and the installation requires flashing pan. The absorber tubes of this collector are made of DWV copper. These copper tubes are four inches in diameter with a wall thickness of 0.058 inch. The copper header tube of the solar hot water collector measures 3/4 inches. The CS-330B Coppersun solar collector features the Solkote selective coating that has minimum absorptivity of 95 per cent, and maximum emissivity of 56 per cent. This solar water heating collector, manufactured by Integrated Solar, has polysocyanurate insulation and is designed with low iron tempered glass that is 1/8 inch in thickness with a minimum transmissibility of 91 per cent.
Other features of the CS-330B Coppersun solar collector include an EPDM gasket, and aluminum frame in a powder-coated paint finish. This solar hot water collector has a foot print area of 25.2 square feet on roof, while the aperture area is 22 square feet. The aperture length and width of the solar water heating collector are 95.25 and 33.25 inches, respectively. The gross weight of the CS-330B Coppersun solar collector, when empty, is 102.24kg. The frame of this solar hot water collector measures 98.75 inches in length and 36.75 inches in width.