Mar 24 2010
Power Up Solar supplies Kyocera CD 300 submersible pump controllers that can connect solar modules with submersible pumps. The submersible pump controller is suitable for one or two solar modules in series, each module containing 36 solar cells. The pump controller provides a combination of maximum power point tracking (MPPT) and boosting of voltage or current of solar modules. The pump controller features a microprocessor that monitors the solar power input continuously and increases the voltage or current to get optimum output from the pump.
Kyocera CD 300 Submersible Pump Controller
The CD 300 submersible pump controller features self configuration that does not need any adjustment or set up. Besides controlling the solar modules, this pump controller also runs the submersible pump with the help of a 12 or 24-volt battery bank. The solar pump controller, offered by Power Up Solar, features various indicators to show the switch status, sensor status, voltage status and overload conditions.
The maximum input voltage of the CD 300 submersible pump controller is 50 volts. Under the current boost mode, the maximum output power of the pump controller is 300 watts, while the maximum output current is 10 amperes. At voltage boost mode, the maximum output power and output current are 150 watts and 5 amperes, respectively. The CD 300 submersible pump controller operates in the ambient temperature range of -20 to +50 degree Celsius. The shutdown temperature of this pump controller is 85 degree Celsius.