The cage height of this wind turbine is 120 in., its diameter is 158 in. and the cage weighs 200 lbs. The rotation speed of its vertical blades is up to 500 rpm and the blades make a sound measuring 15 dB at 5 ft.
The outside air evaporate unit draws air even during very cold weather conditions of -15°C outdoor temperature. The shell design of this heat pump and the optimized fan technology used in the pump allows the pump to operate noiselessly.
The exhaust sensing probe installed in the Advance pellet stove automatically adjusts the feed rate of fuel. The temperature control in the stove incorporates a sensor and a microprocessor to read and control the room heating process at a preset temperature level.
The solar collectors utilized in the thermosiphon heating system are offered in various sizes ranging from 1.5 to 3.5 sq.m. The tanks for storing the water for heating purpose are supplied in 120, 150, 200 and 300 L sizes.
The Aeronautica 29-225 wind turbine incorporates a 4-pole, single wound induction with IP54 protection to protect against dust and water. The synchronous speed rating of the generator 1800 rpm at 60 Hz or 1500 rpm at 50 Hz.
The e300i 1 kW wind turbine utilizes a PM 12ph Polyphase brushless permanent magnet generator. For speed control during high velocity wind conditions beyond 750 rpm this wind turbine incorporates a passive blade pitching.
The length x width x thickness of the HTCB22M grid connected mono-crystalline photovoltaic module is 650 mm x 292 mm x 35 mm and weighs 3 kg. This solar module offers a Pmax of 22 Wp, a Vpmax of 18.00 V, an Ipmax of 1.23 A, a Voc of 22.50 V, an Isc of 1.30 A and a maximum system voltage of 700 V.
The automatic temperature control installed in the stove allows setting of required stove temperature instead of the room temperature. Also the temperature control allows on/off operations as and when required and does away with the requirement of warm/cold cycles.
The single dial adjustment utilized for temperature settings allows easy setting of desired maximum and minimum temperatures for pool or spa. The GL-235 solar pool heating controller has terminal strip connections to manage power inputs, sensor inputs, screw terminal connectors and three pin connectors for forward and reverse valve actuator operations.
The external width x height x depth dimension of the LP20 pellet boiler is 525 mm x 1360 mm x 941 mm and weighs 285 kg. The outlet fumes pipe of this boiler measures 120 mm and its air intake pipe measures 60 mm.
Terms
While we only use edited and approved content for Azthena
answers, it may on occasions provide incorrect responses.
Please confirm any data provided with the related suppliers or
authors. We do not provide medical advice, if you search for
medical information you must always consult a medical
professional before acting on any information provided.
Your questions, but not your email details will be shared with
OpenAI and retained for 30 days in accordance with their
privacy principles.
Please do not ask questions that use sensitive or confidential
information.
Read the full Terms & Conditions.