HelioFlow Combi 3000 Kit Provided by SunMaxxsolar

SunMaxxsolar offers the HelioFlow Combi Kits in various models. The combi kits are a combination hot water and heating systems meant for domestic use. The HelioFlow Combi Kits are currently available in a wide range to meet various size, climatic and usage requirements. These kits comprise empty tubes and commercial class solar tanks for use during the winter months.

The HelioFlow Combi Kits meets nearly 70% to 80% of water heating requirements and 30% of room heating requirements needed by a home.

The HelioFlow Combi 3000 kit provided by SunMaxxsolar incorporates a 007 bronze Taco circulator pump, a 30 plate double wall heat exchanger, a 3/4 inches union NPT mixing value of 80º F to 120º F, a 90/120 ft tank stacked copper hex coil, four numbers of 3/4 inches pass thru pipe and one inch stainless steel open loop flange. This model utilizes a large solar hot water pump and uses a sensor for energy management control. A 533 Ga commercial type solar storage tank is fixed for collecting water. The helioflow solar station utilizes a single pump manufactured by Grundfos. HelioFlowPlusB type of fittings is used for increased tank size.

The Combi 3000 kit offered by SunMaxxsolar has a basic pre-insulated line set of 80 ft and 3/4 inches. This model utilizes 8 numbers of 30 type evacuated tube collectors. The solar water tank used in the model can hold up to 80 gallons of water. This model utilizes a passive solar heat dump system for heating. The commercial DHW space heating controllers used in the model controls heating. This model utilizes 1 inches FIP brass union and a 1 inches x 3/4 inches reducer.