Renewable Energy News

RSS

L90 -2.5 MW Direct Drive Wind Turbine from Lagerwey Wind BV

The L90 -2.5 MW direct drive wind turbine features a hallow main shaft to provide direct access to the hub. This feature makes the design of the hub lighter but strong enough to withstand high velocity wind loads.

25 May 2010

XEMC-Darwind 5MW Offshore Wind Turbine from Darwind

The exterior shield of this wind turbine is roofed with small surface extensions to transfer the generated heat to the cool air thus avoiding the need of a separate cooling system. The rotor diameter of this wind turbine is 115 m, the length of the blade is 55 m and the generator diameter is 5.3 m.

25 May 2010

Willis Solasyphon Solar Water Heater from Pelletheat.co.uk

The Willis Solasyphon solar water heater has a normal shell height of 800 mm and its overall height including its connections measures 1000 mm. The diameter of the outer shell is 75 mm and its overall diameter including that of insulation jacket is 112 mm.

24 May 2010

Suzlon S88-2.1 MW Wind Turbine from Suzlon Energy

The rotor incorporated in the S88-2.1 MW wind turbine measures 88 m in diameter, offers a swept area of 6082 m² and utilizes an electrically regulated full-span blade pitch system allowing faster and efficient pitching of blades.

24 May 2010

MWT 1000A Wind Power Generator from Mitsubishi Power Systems

The MWT 1000A wind turbine incorporates a three stage (1 planetary and 2 parallel) gear box with a gear ratio of 1:92/1:76 at 60 Hz and 50 Hz.

24 May 2010

N90 2.5 Megawatt Wind Turbine Provided by Nordex

The nacelle of this N90 2.5 wind turbine is provided out with a two-stage planetary gearbox with one spur-gear stage or differential gear box.

24 May 2010

Cell M 3BB Monocrystalline Solar Cells from Bosch Solar Energy

Each cell of this module measures 156 mm x 156 mm with an average thickness of Average thickness 200 ìm (± 40 ìm) / 180 ìm (± 30 ìm).

24 May 2010

SWT-3.6-107 Wind Turbine from Siemens

Siemens can supply the SWT-3.6-107 model wind turbine which is suitable for offshore and onshore applications. The rotor of this wind turbine incorporates a cantilevered construction upwind type three blade rotor measuring 107 m with a swept area of 9,000 m².

24 May 2010

Puget Sound Energy Commences Construction Work on Lower Snake River Wind Project

Energy utility Puget Sound Energy has commenced the first phase of construction on its Lower Snake River Wind Project located in Garfield County, Washington.

24 May 2010