The 2.5 MW Series Wind Turbine is available in 75, 85 and 100 m tower sizes. This wind turbine deploys three rotor blades measuring 100 m each and offers a swept area of 7854 m².
The 1000-10 solar collector with an absorbing space of 1.78 m©÷ occupies a total floor space of 2.08 m©÷. The linkage dimension of this collector is 1024 mm x 2040 mm and the cover glass utilized in the model measures four millimeter in thickness.
The blades of the 50 kW wind turbine provided by ReDriven are made of fiber glass, measures seven meter and weigh 340 kg. The weight of the nacelle is 2495 kg. The blades of this wind turbine are designed to offer a sweep of 14.3 meters.
The Ventera wind turbine model VT10-240 provided by Ventera Energy is mounted on a hinged type of fold-over tower with a three leg pattern and a top adaptor. The four guy type of fold over tower is made of five inch sized tubes and is offered in 21, 27 and 36 m heights.
The Gaia-Wind 133-11kW wind turbine provided by Gaia-Wind has an oversized, twin blade designed composite rotor unit measuring 13 m in diameter. In upright position the top edge of the rotor extends to a height of 24.8 m and at the lowest point it extends to 11.8 m above the ground.
The Bornay 6000 wind turbine provided by the Bornay Aerogeneradores has a three phase permanent magnet alternator utilizing neodymium magnets. The nominal power of this wind turbine is 6000 W; the rated voltage is 48 – 120 V at a maximum of 600 rpm.
The Endurance S-343 - 5 KW wind turbine provided by the Endurance Wind Power is meant for use in direct grid connected applications. The rated rotor speed of this turbine is 166 rpm. The cut-in wind speed of this turbine is 4.1 m/s, its cut-out wind speed is 24 m/s, and its survival wind speed is 52 m/s.
The solar collector deployed in the Swan solar hot water system provided by WePower incorporates low iron tempered glass, low-binder fiberglass insulation, rigid foam insulation, stainless steel fasteners, and a copper absorber plate.
Under normal operating cell temperature the X-94a AMORPH plus thin film photovoltaic module provided by Inventux provides a maximum voltage of 97 V, a maximum current of 0.73, an open circuit voltage of 128.6 V, a short circuit current of 0.94 A, and a normal cell operating temperature of 45º C.
The approximate length x width x height of the Bosch Solar Module c-Si M 60 M240 3BB model is 1662 mm x 992 mm x 42 mm and weighs 22 kg.
Terms
While we only use edited and approved content for Azthena
answers, it may on occasions provide incorrect responses.
Please confirm any data provided with the related suppliers or
authors. We do not provide medical advice, if you search for
medical information you must always consult a medical
professional before acting on any information provided.
Your questions, but not your email details will be shared with
OpenAI and retained for 30 days in accordance with their
privacy principles.
Please do not ask questions that use sensitive or confidential
information.
Read the full Terms & Conditions.